Installation Instructions
Step-by-step assembly sheets, submittal data sheets and install videos for every Uniclamp product. Tap a sheet to open the PDF. You can print it or send it with your submittal package.
V-BAT™ Pipe Clamp
Mounts to strut, flat surfaces and 3/8" threaded rod. Strap it with a zip tie, a hose clamp or a stainless band.
UNICLAMP S™ Strut Clamp
Fits 1-5/8" strut. Use channel locks to twist it into place.
How the S installs
- Drop in. Set the clamp into 1-5/8" strut.
- Grip. Grab the clamp with channel locks.
- Twist to lock. Turn it counter-clockwise.
- Locked. It is ready for the pipe. Strap it with the strap of your choice.
UNICLAMP® Original Strut Clamp
Place it in the strut, twist it counter-clockwise by hand and strap the pipe. No tools needed.
HDPE Sleeve for Insulated Pipe
Always use a sleeve on insulated pipe. Cut it to length and wrap it fully around the pipe insulation before you strap it.
Ezyclamp™ Hose Clamp
A hose clamp strap for the V-BAT and the UNICLAMP S. Do not tighten past 2 N·m (17.7 in-lb).
Strut IQ
Installation guide for every product
One sheet with the V-BAT, UNICLAMP S, HDPE sleeve and Ezyclamp steps, the strapping guide and the product range, in English and Spanish.
Una guía con todos los pasos de instalación, en inglés y español.
Open PDFQuestions or comments? Please reach out!
Email info@uniclampusa.com and we will get back to you.